Product part numbers may have changed. Please contact your local representative to verify.
860 Tapping Machine
Equipment Type
Pressure/ANSI Class
Size
Engineered for a wide variety of applications and environments where pipelines cannot be shut down, the 860 tapping machine can be used for hot taps and for setting completion plugs, including LOCK-O-RING® and LOCK-O-RING Plus.
Specifications
- 4-inch through 20-inch (DN 100 to DN 500) taps.
- Maximum working pressure: 100 bar (1,480 psi) at 38°C (100°F).
- Operating temperature range: -29°C to 371°C (-20°F to 700°F) at 48 bar (700 psi) for intermittent service.
- Maximum continuous rating: 177°C (350°F) at 70 bar (1,025 psi).
Key Features
- LOCK-O-RING® bypass gauge.
- Speed control without changing power unit RPM.
- The tapping machine power unit is compliant with EPA Tier 4 emission standards, has a four-point lift system and an emergency air shut-off valve.
- Convenient storage with tapping machine atop power unit.
Common Applications
- Making hot taps on pipes, tanks and storage vessels in preparation for plugging machine operations.
Engineered for a wide variety of applications and environments where pipelines cannot be shut down, the 860 tapping machine can be used for hot taps and for setting completion plugs, including LOCK-O-RING® and LOCK-O-RING Plus.
Equipment Type
Pressure/ANSI Class
Size
Specifications
- 4-inch through 20-inch (DN 100 to DN 500) taps.
- Maximum working pressure: 100 bar (1,480 psi) at 38°C (100°F).
- Operating temperature range: -29°C to 371°C (-20°F to 700°F) at 48 bar (700 psi) for intermittent service.
- Maximum continuous rating: 177°C (350°F) at 70 bar (1,025 psi).
Key Features
- LOCK-O-RING® bypass gauge.
- Speed control without changing power unit RPM.
- The tapping machine power unit is compliant with EPA Tier 4 emission standards, has a four-point lift system and an emergency air shut-off valve.
- Convenient storage with tapping machine atop power unit.
Common Applications
- Making hot taps on pipes, tanks and storage vessels in preparation for plugging machine operations.
