TD Drilling Machines
Equipment Type
Pressure/ANSI Class
Size
The TD-XX or TD-1XX Drilling Machine is a manual or power-driven machine which taps into pipe while under pressure. It is used for making taps on 1/2- through 2-inch (DN 13 - DN 50) pipe without shutdown. This machine is compatible with our T-101 Drilling Machine. It allows for easy completion plug installation, since the feed mechanism matches our SHORTSTOPP® threaded completion plug at 12 threads per inch.
Specifications
- ½-inch through 2-inch (DN 13-DN 50) taps
- Maximum working pressure: 50 bar (740 psig)
- Operating temperature range: -29°C to 82°C (-20°F to 180°F)
- TD-XX has 1-inch NPT male end, TD-1XX has 2-inch NPT female end
Key Features
- Total travel lengths ranging from 6- to 14-inches (depending on the version)
- Compact unit, ranging from 18.6- to 35.3-inches in total length (depending on
version) - Meets NACE Standard MR0175-93, sulfide stress cracking resistant metallic material for oilfield equipment
- Compatible with T-101 Drilling Machine
- Black liquid nitride corrosion resistant finish
Common Applications
- Make connections to pipelines, tanks and plant piping without shutdown
- Make hot taps in preparation for plugging machine applications
- Install 3/4- through 2-inch completion plugs in tapping nipples to permit recovery of tapping valves and to install PIG-SIG® Scraper Passage Indicators
The TD-XX or TD-1XX Drilling Machine is a manual or power-driven machine which taps into pipe while under pressure. It is used for making taps on 1/2- through 2-inch (DN 13 - DN 50) pipe without shutdown. This machine is compatible with our T-101 Drilling Machine. It allows for easy completion plug installation, since the feed mechanism matches our SHORTSTOPP® threaded completion plug at 12 threads per inch.
Equipment Type
Pressure/ANSI Class
Size
Specifications
- ½-inch through 2-inch (DN 13-DN 50) taps
- Maximum working pressure: 50 bar (740 psig)
- Operating temperature range: -29°C to 82°C (-20°F to 180°F)
- TD-XX has 1-inch NPT male end, TD-1XX has 2-inch NPT female end
Key Features
- Total travel lengths ranging from 6- to 14-inches (depending on the version)
- Compact unit, ranging from 18.6- to 35.3-inches in total length (depending on
version) - Meets NACE Standard MR0175-93, sulfide stress cracking resistant metallic material for oilfield equipment
- Compatible with T-101 Drilling Machine
- Black liquid nitride corrosion resistant finish
Common Applications
- Make connections to pipelines, tanks and plant piping without shutdown
- Make hot taps in preparation for plugging machine applications
- Install 3/4- through 2-inch completion plugs in tapping nipples to permit recovery of tapping valves and to install PIG-SIG® Scraper Passage Indicators
